background image

8

Hatteland Display AS

IND100077-1

General

About this manual

The manual contains electrical, mechanical and input/output signal specifications. All specifications in this manual, 

due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update 

and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of 

the manual. This User Manual is a standard/general manual that applies to all variations of its product family, i.e.

deviation from actual configuration may exist.

Furthermore, for third party datasheet and user manuals, please see dedicated Documentation and Driver DVD

delivered with the product or contact our sales/technical/helpdesk personnel for support. 

About Hatteland Display

Hatteland Display is the leading technology provider of specialized display and computer products, delivering high 

quality, unique and customized solutions to the international maritime, naval and industrial markets. 

The company represents innovation and quality to the system integrators world wide. Effective quality assurance and 

investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil 

tested products. Our customer oriented approach, technical knowledge and dedication to R&D, makes us a trusted 

and preferred supplier of approved solutions, which are backed up by a strong service network.

www.hatteland-display.com

You will find our website full of useful information to help you make an informed choice as to the right product for your 

needs. You will find detailed product descriptions and specifications for the entire range on Displays, Computers and

Panel Computers, Military solutions as well as the range of supporting accessories. The site carries a wealth of

information regarding our product testing and approvals in addition to company contact information for our various

offices around the world, the global service centers and the technical help desk, all ensuring the best possible

support wherever you, or your vessel, may be in the world.

 

Contact Information

Head office, Vats / Norway:

Hatteland Display AS

Eikeskogvegen 52

N-5570 Aksdal, Norway

Tel: +47 4814 2200 

[email protected]   

Sales office, Frankfurt / Germany:

Hatteland Display GmbH

Werner Heisenberg Strasse 12,

D-63263 Neu-Isenburg, Germany

 Tel: +49 6102 370 954 

Fax: +49 6102 370 968

Sales office, Oslo / Norway:

Strandveien 35

 N-1366 Lysaker

Norway

Tel: +47 4814 2200 

Sales office, Aix-en-Provence / France:

Hatteland Display SAS

 Actimart- 1140, rue Ampère,  CS 80544

 13594 Aix-en-Provence, Cedex 3

 France 

 Tel: +33 (0) 4 42 16 47 57

Fax: +33 (0) 4 42 16 47 00

Sales office, Vista / USA:

Hatteland Display Inc

380 South Melrose Drive,

Suite 349

Vista, CA 92081

USA

 

 Tel: +1 760-643-4061

Fax: +1 858-408-1834     

For an up-2-date list, please visit www.hatteland-display.com/locations

Содержание Hatteland Display HT B22G Series





































































Отзывы: