EMBRON Hatteland Display HT B22G Series Скачать руководство пользователя страница 32

Страница: 32 / 68

Specifications - Isolated Digital Input/Output Module

PCA100297-1

IND100129-169

All specifications are subject to change without prior notice!

SPECIFICATIONS

Note: All speciﬁ cations are subject to change without prior notice!

Please visit www.hatteland-display.com for the latest electronic version.

2/2

Supported Operating Systems (OS)
Embedded Enterprise (WEE):

- Microsoft® Windows® Server 2003/2008/2008R2 (Eng)

- Microsoft® Windows® 2003/2008/2008R2 (Eng)

- Microsoft® Windows® 7 Professional/Ultimate (Eng, SP1)

- Windows® 10 IoT Enterprise 2016 LTSB

Linux:

- openSUSE® 11.4

- Fedora™ 15

- Ubuntu® 10.04 LTS

- Ubuntu® 12.04 LTS

Note: Listed Operating Systems above are hardware/platform dependent. Please check datasheet for speci



c unit if OS is supported.

Currently supported D2XX Drivers

Processor Architecture

Operating System (OS)

Release Date

(yyyy-mm-dd)

x86 (32-bit)

x64 (64-bit)

Comments [Footnote]

Microsoft® Windows®*

2013-02-20

2.08.28

2.08.28 WHQL Certified [*1]

Release Notes [*2]

Linux

2012-06-29

1.1.12

[*3]

*includes the following versions of the Microsoft® Windows® operating systems:

Windows® XP, Windows® Server 2003, Windows® Vista, Windows® Server 2008, Windows® 7, Windows® Server 2008 R2 and Windows® 8.

For updates, please visit:

http://www.ftdichip.com/Drivers/D2XX.htm

Footnotes:

[*1] =

http://www.ftdichip.com/Drivers/CDM/CDM20828_Setup.exe

[*2] =

http://www.ftdichip.com/Drivers/CDM/CDM%202%2008%2030%20Release%20Info%20for%208.1.rtf

[*3] =

http://www.ftdichip.com/Drivers/D2XX/Linux/ReadMe-linux.txt

Getting started, documentation and specific Hatteland Display Library links:

http://www.ftdichip.com/Support/Documents/ProgramGuides/D2XX_Programmer%27s_Guide(FT_000071).pdf

http://www.hatteland-display.com/pdf/misc/doc101781-1_programmer_guide_ht00273opt-a1.pdf

http://www.hatteland-display.com/drivers/dio_pca100297-1_ht00273opt-a1_package.zip

Additional

• Cable connector

(MC 1,5/ 5-STF-3,81) Terminal Block 3.81 (see illustration below)

• Test and certi



cate

Hatteland Display standard, (tested / type approved by the following classification societies):

IEC 60945 4th

(EN 60945:2002),

IACS E10

EU RO MR

- Mutual Recognition

• Safety IEC60950

The DIO module is intended to be used in control circuits and does therefore need external fuse to meet

safety agency approvals.

Illustration and Pinning

Note: Product below for illustration only. Location of module and product size/design may differ. Connector/pinning/specifications remain the same.

5-pin Terminal Block 3.81

Module A Module B

A1 External Power +

IN+[0]

A2 N/C (Not Connected)

IN-[0]

B1 External Power - (GND1)

IN+[1]

B2 N/C (Not Connected)

IN-[1]

O1 HS[0]

O1 N/C

C1 HS[1]

C1 IN+[2]

C2 N/C (Not Connected)

C2 IN-[2]

D1 HS[2]

D1 IN+[3]

D2 N/C (Not Connected)

D2 IN-[3]

O2 HS[3]

O2 N/C

Содержание Hatteland Display HT B22G Series





































































Результаты поиска

Содержание Hatteland Display HT B22G Series

Отзывы:

Похожие инструкции для Hatteland Display HT B22G Series

Бренды по названию

Популярные бренды

EMBRON Hatteland Display HT B22G Series, Руководство пользователя

Результаты поиска

Содержание Hatteland Display HT B22G Series

Отзывы:

Похожие инструкции для Hatteland Display HT B22G Series

Бренды по названию

Популярные бренды