background image

66

IND100077-128

Rev.

By

Date

Notes

00_1

JE

SE

18 Mar 2013 Internal review release. Preliminary version

00_2

JE

BU

MM

AK

MJL

SE

10 Apr 2013 Revised after internal review. Preliminary version

00_3 BEJ

JE

MM

19 Apr 2013 Revised after internal review. Preliminary version

04_4

JE

MM

SE

10 May 2013 Revised after internal review. Preliminary version

01

JE

SE

02 Jul 2013 Revised and created release version for internet/dvd.

02

LS

JE

AK

SE

08 Oct 2013 Revised typenumber for DC Power In Connector (1805301 to correct 1961986), page 5,13

Revised “Housing / Terminal Block Connector Overview”, page 21-22

Added mounting guidelines and tips regarding cooling/heat, page 25

Revised specifications for “HT 00254 OPT-A1”, added Programmer’s Guide links, page 35

Revised “Specifications - External Module USB (CAN/COM/DIO) - page 2”, page 40

Revised specifications for “External Module”, added Programmer’s Guides links, page 40

Added Sales Drawing of computer with mounted HT 00270 OPT-A1 (Mounting Bracket Kit), page 45

03

WJ

JE

AK

SE

19 Mar 2014 Revised specifications for HT B22Gx STC-yzz-Mzzz datasheet, page 26

Revised documentation links for specifications for “External Module”, page 32

Revised documentation links for specifications for “HT 00268 OPT-A1” DIO module, page 30

04

JE

LS

SE

07 Aug 2014

Revised contents of package, new HT 00300 MSOS IMAGE (USB) option and HT 00228 OPT-A1, page 5

Added Sales Drawing for HT 00228 OPT-A1, Mounting Plate w/cable relief, page 38

Revised Specifications regarding Testing & Type Approvals, page 26-32

05

LS

SE

13 Aug 2014 Revised Sales Drawing for HT 00228 OPT-A1 (rev 5), changed M4x10 to M4x8 screws, page 38

06

BB

SE

30 Oct 2014

Minor text changes, page 18

Reworked Physical Connectors to show actual available connectors for HT B22 units, page 46-49

07

PG

VM

MS

SE

1 Apr 2015

General maintenance update regarding latest company profile changes

General Mounting Instructions chapter, grounding, point 6, page 12

Revised Return of Goods, page 54

Revised General Terms and Conditions, page 55

08

MJL

SE

04 Jun 2015

Revised Grounding Screw text, page 22

Revised specifications, page 26

Added PCA100298-1, LAN Module Option, page 32

09

SE

12 May 2016 Added LAN Module Option PCA100298-1 illustration/text, page 23

Revised NMEA / IEC COM Module RS-422 / RS-485 datasheet, page 29 added

10

SE

14 Nov 2017 Maintenance updates throughout the manual based on current company profile and recent revisions for 

product datasheet and technical drawings

11

JE

VM

SE

12 Apr 2018

Added PCA100309-1 factory option, page 23,34

Revised SSD chapter, page 46-49

Several text corrections performed throughout the manual

Revision History

Содержание Hatteland Display HT B22G Series





































































Отзывы: