emaux SB & SR Series Скачать руководство пользователя страница 4

SUCTION ENTRAPMENT HAZARD

This  pump  produces  high  levels  of  suction  and  creates  a  strong  vacuum  at 

the main drain at the bottom of your pool and spa. This suction is so strong 

that it can trap adults or children under water if they come in close proximity 

to a pool or spa drain or a loose or broken drain cover or grate.

The  Virginia  Graeme  Baker  (VGB)  Pool  and  Spa  Safety  Act  creates  new 

requirements for owners and operators of commercial swimming Pools and 

spas.

Commercial pools or spas constructed on or after December 19, 2008, shall utilize:

1.    A  multiple  main  drain  system  without  isolation  capability  with  suction  outlet  covers  that  meet  ASME/ANSI 

A112.19.8a Suction Fittings for Use in Swimming Pools, Wading Pools, Spas, and Hot Tubs and either :

1.1  A  safety  vacuum  release  system  (SVRS)  meeting  ASME/ANSI  A112.19.17  Manufactured  Safety  Vacuum 

Release systems (SVRS)

For  Residential  and  Commercial  Swimming  Pool,  Spa,  Hot  Tub,  and  Wading  Pool  Suction  Systems  and/or 

ASTM F2387 Standard

Specification  for  Manufactured  Safety  Vacuum  Release  Systems  (SVRS)  for  Swimming  pools,  Spas  and  Hot 

Tubs or

1.2 A properly designed and tested suction-limiting vent system or

1.3 An automatic pump shut-off system.

Commercial pools and spas constructed prior to December 19, 2008, with a single submerged suction outlet shall 

use a suction outlet cover that meets ASME/ANSI A112.19.8a and either :

1. A SVRS meeting ASME / ANSI A112.19.17 and/or ASTM F2387, or

2. A properly designed and tested suction-limiting vent system, or

3. An automatic pump shut-off system, or

4. Disabled submerged outlets, or

5. Suction outlets shall be reconfigured into return inlets.

There are five types of suction entrapment according to The Virginia Graeme Baker (VGB) Pool and Spa Safety Act

1

Body Entrapment 

a section of the torso becomes entrapped

2

Limb Entrapment 

an arm or leg is caught by or pulled into an open drainpipe

3

Hair Entrapment 

or entanglement hair is pulled into and/or wrapped around the grate of the drain cover

4

Mechanical Entrapment 

the bather's jewelr y or clothing gets caught in the drain or the grate

5

Evisceration

 the victim's buttocks come into contact with the pool suction outlet and he or she is disemboweled

TO REDUCE ENTRAPMENT HAZARD RISK

Two  function  suctions  outlets  per  pump  must  be  installed  to  prevent  entrapment.  The 

minimum separate of suction on the same plate must be at least point to point measurement 1 

meter (3ft) apart. It is used to avoid “dual blockage” by bather. 

If  suction  is  found  damage,  broken,  cracked,  missing  or  not  securely  attached  during  regular 

checking, shunt down the pool and replace it immediately. 

A vacuum release or vent system is recommended to install for suction entrapment release. 

P3    SUCTION ENTRAPMENT HAZARD

Содержание SB & SR Series



















Отзывы: