1. Hydrau-Power APS series pump deliver y Emaux latest technology in pump design.
2. It is constructed in reinforced plastic pump body in lightweight and corrosion-resistant that suitable for
marine applications.
3. Motor design in IE3 class premium efficiency standard provide incredibly efficient and low noise level.
4. High water flow impeller design by computational fluid dynamics (CFD) analysis optimize the pump
performance than comparable pumps.
5. Large volume Detachable pre-filter with basket
design provide high flow rate application and
flexible installation.
6. ANSI Class 150 and DIN PN10 compatible flange
standard design to fit into different piping system
environments.
7. It is three phase electrical high power driving motor
that is good for swimming pool and Sea Water
applications.
APS SERIES PLASTIC PUMP OVERVIEW P4
1. A protective device is to be installed in the fixed wiring.
2. This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensor y or mental capabilities or lack of experience and knowledge if
they have been given super vision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without super vision.
3. The appliance shall be installed in accordance with national wiring regulations means for disconnection must
be incorporated in the fixed wiring in accordance with the wiring rules. A disconnected incorporated in the
fixed wiring is to be provided.
4. The pump is to be supplied through a residual current device (RCD) or Ground Fault Circuit Interrupt (GFCI)
having a rated residual operation current not exceeding 30mA.
5. The pump is to be supplied by an isolating transformer or supplied through a residual current device (RCD)
having a rated residual operating current not exceeding 30mA.
CAUTION!
Correct disposal of this product
This symbol on the product, or in its packaging, indicates that this
product may not be treated as household waste. Instead, it should be
taken to the appropriate waste collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for
the environment and human health, which could other wise be caused by
the inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your local
council, your household waste disposal ser vice, or the shop where you
purchased the product.
1. APS SERIES PLASTIC PUMP OVERVIEW
