EMAK 101, Руководство оператора

Страница: 95 / 192

17
5.2 WHY THE SAFETY DEVICES CUT IN
The safety devices work in two ways:
– hey prevent the engine from starting if all the safety require-
ments have not been met;
– they stop the engine if even just one of the safety require-
ments is lacking.
a) To start the engine, it is necessary that:
– the transmission is in “neutral”;
– the blades are not engaged;
– the operator is seated or the parking brake is engaged.
b) The engine stops when:
– the operator leaves his seat when the blades are engaged;
– the operator leaves his seat when the transmission is not in
“neutral”;
– the operator leaves his seat with the transmission in “neutral”
but without applying the parking brake;
– the grass-catcher is lifted or the stone-guard is removed when
the blades are engaged;
– the parking brake is engaged without disengaging the blades;
– the speed change is activated (
4.22) or the drive pedal
( 4.32) with the parking brake on.
5.3 DIRECTIONS BEFORE STARTING WORK
Before starting to mow, it is necessary to carry out several
checks and operations to ensure you can work efficiently and in
maximum safety.
5.3.1 Seat adjustment
To change the seat position,
loosen the four fixing bolts (1)
and slide it along the slots.
Once you have found the right
position, tighten the four
screws (1).
5.3.2 Tyre pressure
Having the right tyre pressure is the main condition for ensuring
that the cutting deck is horizontal and mows evenly.
Unscrew the valve caps and connect a compressed air line with
a gauge to the valves and adjust the pressure to the indicated
values.
EN
1 1
1,0 bar
1,2 bar
(15 x 5,00-6)
1,5 bar (13 x 5,00-6)