EN
No.
Description
11
Possibility to "zero" or to "undo zero" of the flow channel.
Note:
This is only possible if a sensor is connected.
In order to avoid the flow being zeroed or the zeroing being undone unintentionally, the user
has to insert a password to proceed.
To "zero" or to "undo zero":
•
Select the field for the desired action.
•
This automatically opens a pop-up
window asking for the user name and
password.
•
The default user name is “root” and
default password “uknown”
(
Please note
, like unknown" but
without
the “n”).
•
Once the user name and password were inserted, the user can select "ok" to proceed, or
"cancel" to stop the process.
Some web browsers automatically save the user name and password, even if
they do not explicitly let users know that they do. If this is the case, the pop-
up window asking for the user name and password only appears once—for
the first action where it is needed—but after that all actions can be carried
out without the user having to enter the user name or password.
12
Possibility to open the sensor information page.
For more information, refer to the description below.
13
Global device error (displayed as hexadecimal value).
For more information, refer to chapter 10 "Troubleshooting".
14
Possibility to reset the global error
15
Possibility to open the set-up page.
For more information, refer to the description below.
16
Possibility to open the device logging page.
For more information, refer to the description below.
17
Software version of the BioProTT
TM
FlowMCP
18
Link to the em-tec website
Table 7: Description of the main page of the web interface for the BioProTT
TM
FlowMCP (1-4 channels)
BioProTT™ FlowMCP
Copyright em-tec GmbH
Page 29
D214-703 BioProTT™FlowMCP - User Manual – V4.0