EM Acoustics ESP-8, Руководство пользователя

Страница: 21 / 28

Page 21 of 28
ESP-8 User Manual
v2 November 2019
7.0 – Servicing Information
All ESP-8 components can be removed for service purposes if required, using the minimum of tools.
7.1 – ESP-8: Removing the grille
TOOLS REQUIRED: 4mm Allen key
1. Lie the enclosure on its’ back and remove the two M6x30 countersunk socket screws from each end
using a 4mm Allen key, and then lift the grille clear of the cabinet.
2. To replace the grille, position the grille on the front of the ESP-8 and ensure the threaded fittings on
the grille are lined up with the mounting holes – gentle pressure may be required. Replace all of the
M6x30 countersunk socket screws and ensure they are all are started in their threads before
beginning to tighten. Ensure they are all tightened evenly so that the grille sits straight and does
not rattle. Be careful not to over-tighten as this will distort the grille.
M6x30 countersunk socket
machine screws