EM Acoustics ESP-8, Руководство пользователя

Страница: 7 / 28

Page 7 of 28
ESP-8 User Manual
v2 November 2019
INSTALLATION INSTRUCTIONS
1 THIS PRODUCT MUST BE EARTHED. Use only a flexible cable or cord provided with a green or
green and yellow core which must be connected to the protective earthing terminal of a suitable
mains plug or the earthing terminal of the installation. The cord must be of maximum length 7.5
meters, rated SJ, SJT, or SJE, 10A minimum and be marked VW-1.
2 Do not install this equipment in an enclosed space. Do not limit free ventilation and movement of air
around the back panel. Ensure that there is at least 100mm (4") of space around all sides of the
product for ventilation.
FOR CUSTOMERS IN EUROPE
This product complies with both the LVD (electrical safety) 73/23/EEC and EMC (electromagnetic
compatibility) 89/336/EEC directives issues by the commission of the European community.
Compliance with these directives implies conformity with the following European standards:
EN60065 Product safety
EN55103-1 EMC emissions
EN55103-2 EMC immunity
This product is intended for the following electromagnetic environments: E1, E2; E3 & E4.
FOR CUSTOMERS IN THE USA
This product has been tested for electrical safety and complies with:
UL60065 7th edition
DECLARATION OF CONFORMITY WITH FCC RULES
We, EM Acoustics Ltd. of Cranleigh, Surrey, GU6 8TB, England, declare under our sole responsibility that the
device, ESP-8, complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential and commercial installation.
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment and the receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.