32
At any activation a respective icon appears above on the right hand side of display.
Through push-buttons
and
it is possible to select the increasing or decreasing number of panel on which to effect the
operations forseen with the numerical push-buttons shown on the second line of display:
By pressing the push-button
you can return to the switchboard rest initial state.
3.3.2 Mode for “communication with the entrance panel”.
With the switchboard in “communication with the entrance panel” mode, through push-button
it is possible to operate local-
ly with the switchboard or activate the remote ones related to the connected entrance panel. Everything is the same as the pre-
vious paragraph, with the exception of push-button with which you can go back to the previous state for the switchboard viewing.
3.4.
SWITCHBOARD APPOINTMENTS
Up to 10 appointments can be inserted, regarding the single porter switchboard. Each appointment can be associated with a dif-
ferent text note of maximum 40 characters. Each appointment can (or may not) have a periodic repetition. The available repetitions
are:
• No repetition (single). The event occurs once only at the set date and time and then is disabled.
• Annual repetition. The event is repeated each year at the same set time.
• Monthly repetition. The event is repeated each month at the same set time. If a month does not have a sufficient number of days
(for example if programmed for the date 30 and the current month is February) the last effective day is selected.
• Alarm. A series of days can be specified in which the appointment is activated at a set time.
• Weekly repetition. The event is repeated each week at the same set day and time.
• Daily repetition. The event is repeated every day at the same set time.
• Hourly repetition. The event is repeated at the selected hour interval starting from the set time.
Enter programming mode by pressing
+
. Use keys
and
to move from one appointment to another, or
press
for appointment 1,
for the second,
for the tenth and so on. From position 1, press
to move to inter-
nal device appointments.
Use key
to skip all intermediate phases and go directly to the internal device appointments.
To enable or disable an appointment, use key
. The enabled status us indicated by the symbol
in the last position. This
can be done independently from modifications to the appointment.
To modify an appointment, press the key
. If the appointment has never been programmed:
