3
1.
GENERAL INFORMATION
1.1.
INTRODUCTORY NOTES
Type 945F enables the set-up of an alphanumeric switchboard for Elvox 2-wire video door entry systems. The device is configu-
red as standard with an alphanumeric LCD display (2 rows x 40 columns) for the display of communication messages to and from
the associated system, a handset for audio communication with the system panels and for communication with the riser devices
(interphones and monitors) and a multi-function keyboard for call selection, and functional management of operations for switchbo-
ard configuration (communication parameters, alphanumeric agenda related to user table, clock and alarms).
The switchboard can also be configured with supplementary units for the management of a video signal: a camera module (inter-
nal, in which case the switchboard model name is 945F/T) and a video module (external) on the base unit fitted with the operator
control interface:
Caution:
If the following consumer unit Art. 945F is installed in place of a previous version, check that the terminals are in the
system connector and in the same position as in the connector supplied with the new consumer unit.
On start-up, the switchboard displays its specific name (Type 945F), the date and the software version number:
and then briefly displays the presentation window:
The last three characters on display indicate respectively:
• ‘.’ Check in progress of correctness of program memory contents. Replaced by ‘+’ if check is positive and ‘?’ if the check fails.
There may also be the character ‘!’ if information is missing for the correctness check.
• ‘M’ indicates the external presence of the monitor.
• ‘T’ indicates the internal presence of the camera module, which means the switchboard model is type 945F/T.
Messages are then displayed regarding initial operating status:
these messages are displayed in alternating mode, if the agenda contains at least one name, with:
R
