Elvox 46540.H16, Инструкция по установке и эксплуатации

Страница: 75 / 96

73
EN
3 - Checkmark the searched devices and click “OK” button to return to the previous interface. Click “Apply” button and then the added devices will be listed
in the device management interface. “Connected” status means connecting the device successfully and you will see the live image.
You may also select the added device and click “Setup” button to modify channel, IP address of the device.
To add IP cameras via WAN:
1 - Please go to Main Menu IP Camera tab.
2 - Click “Add” button to pop up a window as shown below. You need to check “Enable” box, select channel and manufacturer and manually input IP address,
server port, username and password of this device.
If the IPC is not in the same local network, you can select the device and click “Setup” to modify the IP address of the searched device.
Note:
If the network of IP cameras and AHD Hybrid DVR are in LAN, their IP address must be in the same network segment. For example: If the IP address
of AHD Hybrid DVR is 192.168.011.007, the IP address of IP camera must be 192.168.011.XXX.