Elvox 46540.H16, Инструкция по установке и эксплуатации

Страница: 72 / 96

70
To delete user:
1. Go to Menu Setup Users interface.
2. Select the added user you want to delete and then click “Delete” button.
To modify user:
1. Go to Menu Setup Users interface.
2. Select the added user you want to modify and then click “Modify” button to do the relevant operation.
To change user password:
1. Go to Menu Setup Users interface.
2. Select the added user you want to change its password and then click “Change Password” button.
6.8 P.T.Z Configuration
P.T.Z configuration includes two submenus: serial port and advanced.
Serial port settings are as follows:
1. Go to Main Menu Setup P.T.Z Serial Port interface. Refer to Fig 6-11.
Parameter Meaning
Address The address of the PTZ device.
Baud rate Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.
Protocol Communication protocol of the PTZ device. Range from: NULL, PELCOP, PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA,
SAMSUNG, RM110, HY, N-control.
Simulative Cruise If enabled, no matter whether the PTZ device supports cruise or not, the presets will cruise.
2. Select “Enable” and set up the value of address, baud rate and protocol according to the settings of the speed dome.
3. Select “All” to set the same settings for all channels.
Advanced settings include preset setting, cruise setting and track setting.
Go to Main Menu Setup P.T.Z Advanced. Refer to Fig 6-12.
Fig 6-11 P.T.Z Configuration-Serial Port
Fig 6-12 P.T.Z configuration-advanced
To set up preset:
1. In the Advanced interface, click preset “Setting” button to see a dialog box as Fig 6-13.
Fig 6-13 Advanced-Preset Setting
EN