Elvox 46540.H16, Инструкция по установке и эксплуатации

Страница: 53 / 96

51
3 Basic Function Instruction
3.1 Power On/Off
Before you power on the unit, please make sure all the connection is good.
3.1.1 Power On
1. Connect with the source power.
2. The device will boot and the power LED would turn blue.
3. A WIZARD window will pop up and show some information about time zone, time setup, network configuration, record configuration and disk manage -
ment. User can set up here and refer to the concrete setup steps from the corresponding chapters. If users don’t want to set up Wizard, please click Exit
button to exit. Press and hold FN/ESC key to switch the resolution of the VGA/ HDMI output.
3.1.2 Power Off
User can power off the device by using remote controller, keyboard and mouse.
1. Go to Menu and then select “Shut Down” icon to pop up the Shut down window.
2. Click OK. Then the unit will power off after a while.
3. Disconnect the power.
3.2 Login
User can login or log off the DVR system. Once logged off the user cannot do any other operation except changing the multi-screen display.
Fig 3-1 Login
Notice: The default user name and password is “ admin” and 123456”.
For complete operational steps for changing password, adding or deleting users, please refer to section 4.7 User Management Configuration.
3.3 Live Preview
Fig 3-2 Live Preview Interface
EN
Symbol Meaning
Green Manual record
Yellow Motion detection record
Blue
Schedule record