Elvox 46241.F16H, Инструкция по установке и эксплуатации

Страница: 110 / 124

108
EN
11.2 Basic Configuration
11.2.1 Common Configuration
Click Start

Settings

System

Basic

General Settings to go to the following interface. Set the device name, device No., language, video format and
resolution. Enable or disable wizard, “Log In Automatically” and “Log Out Automatically” (if checked, you can set the wait time). Click “Apply” to save the
settings.
Device Name
: The name of the device. It may display on the client end or CMS that help user to recognize the device remotely.
Video Format : Two modes: PAL and NTSC. Select the video format according to the camera.
11.2.2 Date and Time Configuration
Click Start

Settings

System

Basic

Date and Time to go to the interface as shown below. Set the system time, date format, time format and time zone of
the NVR. If the selected time zone includes DST, the DST of the time zone will be checked by default. Click “Apply” to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
Manual : select “Manual” in the “Synchronous” option and then click after the “System Time” option to set the system time.
NTP : select “NTP” in the “Synchronous” option and then input the NTP server.
11.3 Factory Default
Click Start

Settings

System

Maintenance

Factory Default and then click “Reset to factory default” button in the interface to reset to the factory default
settings.
11.4 Device Software Upgrade
You can click Start

Settings

System

Information

Basic to view MCU, kernel version and firmware version and so on. Before upgrade, please get the
upgrade file from your dealer.
The upgrade steps are as follows:
1- Copy the upgrade software into the USB storage device.
2- Insert the USB storage device into the USB interface of the NVR.
3- Click Start

Settings

System

Maintenance

Upgrade to go to “Upgrade” interface. Select the USB device in “Device Name” option and go to the path
where the upgrade software exists. Select the upgrade software and then click “Upgrade”. The system may automatically restart during upgrading. Please
wait for a while and do not power off the NVR during upgrading.
Note :
The file system of the USB mobile device which is used for upgrading, backing up and restoring should be FAT32 format.
GMT +01 Amsterdam, Berlino , Roma ˅