31
© 2021, Elon Group AB. All rights reserved.
FOLLOW THE INSTRUCTIONS BELOW
TO ACHIEVE THE BEST POSSIBLE
COOLING OUTPUT:
CLEANING AND CARE
1) When using the partycooler for the first
time: Start up the partycooler and let it
run continuously for 12–18 hours.
2) Change the position of the baskets inside
the cooler after 6 hours to
enhance cooling output.
3) Position the bottles inside the cooler so
that there are gaps between them (do
not put too many bottles in).
Warning:
Unplug the partycooler from the mains before cleaning (to avoid the risk of
electric shock).There is a risk of serious injury if you do not comply with this
instruction.
Generally:
Do not use strong chemicals, abrasive products, ammonium chloride, chlorine
bleach, concentrated detergents, solvents or scouring pads.Some of these
chemicals can damage and/or discolour the surfaces of the partycooler.
1) Remove all loose parts from the appliance.
2) Wipe down the internal and external surfaces with a damp cloth. It is a good idea to
add a little vinegar to the water (this will protect the appliance against mould or fungal
attack).
3) Remove the lid and clean it.
4) Clean the detachable bottom section and all parts of the lid with lukewarm water and
detergent.
5) Carefully wipe down all components once you have finished cleaning.
6) When fitting the lid, make sure its sealing ring and the rubber strap of the hinge have the
groove facing downwards.
IMPORTANT!
Make sure the partycooler is completely dry on the inside when not using it
(this will prevent mould formation).For best results, we recommend you store it with the lid
open.
