30
© 2021, Elon Group AB. All rights reserved.
BEFORE USE
CONNECTING THE PARTYCOOLER
We recommend that you clean the
partycooler inside with lukewarm water and
a mild detergent (allow it to dry before using
it again).
The temperature in the partycooler varies
depending on:
• Ambient temperature
• How often and how long the lid is
opened
• Its contents
This means the length of time it takes for
the partycooler to reach the set temperature
may vary.
The refrigeration system is designed for use
when the cooler is on a level surface. Do
not stand the partycooler at an angle.
If the partycooler must be tilted (e.g. when
handling or moving it), let it stand for 20 to
30 minutes in an upright position before
plugging it in and restarting the refrigeration
unit.
When the appliance is not being moved,
apply the brake on one of the appliance’s
three castors (if you do not, it may move in
an uncontrolled manner and get damaged).
* Incorrect use of the earthed plug can
result in electric shock. Contact your
dealer immediately if you discover that the
power cord is damaged.
1. Makes sure that the appliance is
correctly earthed. The power cord has
an earthed plug designed for a standard
wall socket (this minimises the risk of
electric shock).
2. Only use a correctly installed and
earthed wall socket to connect the
appliance. Make sure the power cord
is always correctly earthed (under no
circumstances should you tamper with
the earthing of the plug). Contact an
authorised electrician if you have any
questions about the appliance’s power
supply and/or earthing.
3. This appliance is intended for a standard
wall socket (220–240 V, 50 Hz) with the
correct earthing.
USING THE PARTYCOOLER
1. Plug into the wall socket.
2. Press the On/Off button (to the right
of the indication window) to start the
partycooler.
3. Press the thermostat button (to the left
of the indication window) to adjust the
desired temperature. The numbers in the
indication window will flash during the
setting process. The thermostat can be
adjusted through 0–15 °C.
During use, the indication window shows
the average temperature of
the cooler.