48
49
© 2021, Elon Group AB. All rights reserved.
7. Unscrew the lower hinge, transfer it to the other side, screw
in place and fit washer.
8. Referring back to step 6, transfer part (1) to right and part (2)
to the left and then fix them with screws (4). Finally install part
(3).
9. Exchange the wires in the left and right slots of freezer body.
10. Move the door to an appropriate position, adjust part (1)
(which is in the plastic bag) and the door. Move the connecting
wire (2) in the slot of the door from left to right, then fix part (1)
and the wire (2) using screws (3). (Please hold the door securely
when installing.)
11 . Connect electrical connector (1) in accordance with step 3,
then install part (2) (which is in the plastic bag).
12. Reverse part (1) and install it on the left corner of the door,
then mount part (2). (Both of which were removed in step 2.)
13. Take the reed switch out of the mounting block (part (3)
in step 3) and mount it on the block that is marked “L” in the
plastic bag). Put the mounting block that you just removed back
in the plastic bag.
Note, make sure the reed switch fits the mounting block
securely.
14. Install part (1), connect the wire connector (2), then install
part (3).
Lower hinge part
(right)
Upper hinge
part (right)
Upper hinge cover (right)
Содержание CFS5185V
Страница 95: ...95 2021 Elon Group AB All rights reserved...