47
© 2021, Elon Group AB. All rights reserved.
2. Remove part (1) from the top of the freezer body from the left
side, then remove part (3) and part (4) on the door in the same
way. Remove part (2) and put it back in the plastic bag.
3. Disconnect electrical connector (1) as well as electrical
connector (2) and then remove part (3).
4. Remove the screws (1), disconnect the earth wire (2), and
remove part (3).
Note:
Hold the door securely during step 4 to prevent the door
dropping.
5. Remove the door and place it on a smooth surface with its
panel upwards.
Prise off part (1) and part (4), then undo screws (2) as illustrated.
Transfer the handle (3) to the left side, then install screws (2),
part (1) and part (4) in turn. Undo screws (7), detach part (6) and
part (5), turn part (6) over and then install part (5) and part (6) on
the right side with screws (7).
6. Lay freezer flat, remove part (3) and then undo screws (4).
Remove part (2) and part (1).
1. Upper cover
2. Upper hinge cover (left)
4. Corner cover
3. Protective cover on
top of door
Special flange self-
tapping screws
Earth wire
Upper hinge part
(left)
Handle covers
Special self-tapping screws
Handle
Screw hole covers
Door holder
Stop block
Self-tapping screws
Lower hinge part (left)
Front foot fixed board
Adjustable bottom foot
Self-tapping screws
NOTE: washer may
stick to the door.
washer
Содержание CFS5185V
Страница 95: ...95 2021 Elon Group AB All rights reserved...