EluneVision Elara NanoEdge, Руководство пользователя

Страница: 5 / 15

ASSEMBLY
Insert two Corner Brackets into the slots on each side of the vertical frame.
Center the brackets and then insert the Set Screws. Do not tighten the set
screws, as shown below:
Your screen now should look like the diagram shown below. Join the Inner
Frame pieces together with the brackets from previous steps.
7
1d)
1c)
Starting with the horizontal frames, insert the Joint Brackets into the other
horizontal frame and join the two horizontal frame pieces together. Push
the two frames together, make sure there is no gap, and then tighten the
Set Screws.
2a)
Insert the Corner Brackets into both sides of the vertical frame and the
horizontal frame. Align the corner pieces and push the two frame pieces
together. Make sure there is no gap bigger than 1mm, then tighten the Set
Screws.
2b)
Make sure you align both sides properly and center the bracket
inside its slot before tightening the Set Screws on either side.
8
ASSEMBLY