Servicing
25
6.5 Adjusting the gripper arm position
The gripper arm position must be precisely adjusted to ensure that the crucible is gripped
accurately.
Fig. 14: Adjusting the gripper arm position
Number
Component
Description
1
Screws for the X position
Used to adjust the X position of the gripper arm
2
Screws for the Y position
Used to adjust the Y position of the gripper arm
Proceed as follows to adjust the gripper arm position:
1.
Release the screws for the X (
1
) and Y (
2
) position of the gripper arm (see
Fig. 14: Adjusting the gripper arm position)
2.
Switch through the individual steps with the help of manual mode until the
arm has reached the chain crucible position.
3.
Align the gripper arm with the help of the supplied spirit level until it is as
horizontal to the crucible as possible.
4.
Align the gripper arm so that the crucible is midway between the fingers.
5.
Tighten the screws for the X (
1
) and Y (
2
) position of the gripper arm (see
Fig. 14: Adjusting the gripper arm position).
The position of the gripper arm has now been adjusted.
1
2
X
Y
Содержание CSi/d
Страница 2: ...2 Copyright Copyright by Eltra GmbH Retsch Allee 1 5 42781 Haan Germany ...
Страница 4: ...Contact information 4 ...
Страница 36: ...Index 36 9 Index ...
Страница 38: ...Copyright Copyright by Eltra GmbH Retsch Allee 1 5 42781 Haan Germany ...
