eltima electronic Jokie 2, Руководство пользователя

Страница: 14 / 26

Operating modes
Switch position: Reach large, object large
Working distance
[m]
Reflector
20 mm 40 mm 80 mm
2 7 20 ---
3 7 18 ---
4 5 18 ---
5 3 18 50
6 --- 18 45
8 --- 12 36
10 --- --- 30
12 --- --- 23
14 --- --- 12
16 --- --- 8
Table 6: Sensitivity in mm, using switch position: large, large
Release delay, lag time
Using the potentiometer one can, if needed, set a delay
time. The effect will be that the connected camera or the
speedlight, based on the interruption of the light beam, is
released later according to the programmed delay.
One can set the delay on the lowest possible level the light
barrier offers, that being 20µs, from the left side, up to a
maximum of 10 seconds, from the right side.
A strongly bent characteristic curve allows a very precise
setting of up to one second, afterwards a rough setting of
up to 10 seconds.
The delay time is active in all operating modes except for
the passive-mode, see Thunderstorm photography.
14
© eltima electronic 2013
Image 10: delay time curve