eltima electronic Jokie 2 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 26

eltima electronic Jokie 2 Скачать руководство пользователя страница 10

Functional concept

Sensitivity

It is the sensitivity that determines how big an object has

to be at the least in order to be detected by the light barri-

er. Working with high sensitivity, very small objects can be

captured, with lower sensitivity, only larger objects will be

registered and smaller ones remain unnoticed.
In the case of the light barrier

the sensitivity cannot

be adjusted. Nevertheless it can be influenced by the

choice of reflector, working distance and transmission

power of the IR-emitter.
The smaller the reflector, the less light will be reflected

and returned to the receiver, see section

Reflectors

. When

less light gets back to the receiver, the amount of light is

the closer to the threshold value. Then already a fairly

small object will be enough in order to weaken the light

beam to such an extent that the amount of light will be

below the threshold value.
The larger the working distance, the more light intensity is

lost before getting back to the receiver and therefore the

amount of received light is closer to the threshold. Here a

small object will be enough as well in order to weaken the

light beam so that the amount of light will fall below the

threshold value.
The less light is emitted by the IR-sender, the less will be

returned to the receiver and thus the smaller the objects

can be and still bring about a release of the camera.

Facit

: The

smaller

the reflector is, or the

larger

the

working distance or the

smaller

the transmission

power of the IR sender, the

higher the sensitivity

is.
The other way around, the

larger

the reflector is, or

the

smaller

the working distance or the

larger

the

transmission power of the IR sender, the

lower is

the sensitivity

of the light barrier.

10

© eltima electronic 2013

«
...
8
9
10
11
12
...
»

Содержание Jokie 2



























Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды