WEP-3ax, WEP-3ax-Z. User manual
26
•
•
•
•
Click the "Scan" button to start the spectrum analyzer. The information window to the right of the button
displays the time in seconds that has elapsed since the start of scanning. The time of the spectrum analyzer
on the Radio 2.4 GHz radio interface does not exceed 20 seconds, on the Radio 5 GHz does not exceed 25
seconds.
Last scan was...
– last scan date and time;
Channels list
– list of channels to be scanned;
Channel
– number of the channel on which the scan was performed;
Load
– information about radio channel load, expressed as a percentage.
5.4.5 The "Events" submenu
In this section, you can view a list of real-time informational messages which contains the following
information:
The spectrum analyzer on the main radio interface only works on the channels that are reflected in the
"Channels List" parameter. For example, if the Radio 2.4 GHz channel list contains channels '1 6 11', the
spectrum analysis will only be performed for channels 1, 6 and 11. To add/remove channels from this
list, go to the tab corresponding to this radio interface on the "Radio" page and make changes in the
"Use Limit Channels" parameter.
In order to analyze all the channels of the band on which the radio interface operates, go to the tab
corresponding to the radio interface on the "Radio" page and uncheck the option "Use Limit Channels".
After receiving the results of the spectrum analyzer, check the "Use Limit Channels" option again.
For more information about configuring the radio interface via the WEB-interface, see section
