WEP-3ax, WEP-3ax-Z. User manual
16
1.
a.
b.
c.
2.
a.
b.
1.
2.
1 – metal bracket; 2 – armstrong panel; 3 – plastic bracket; 4 – bolt; 5 – device.
Figure 8 – Mounting to a false ceiling
Fasten metal and plastic bracket on a ceiling as shown in Figure 8.
The plastic bracket (
3
) connects to the metal bracket (
1
) on the false ceiling in the following order:
metal bracket -> armstrong panel -> plastic bracket.
Cut the hole in the armstrong panel. The size of the hole should be equal to hole of metal bracket.
Conduct wires through the hole.
Align holes in metal bracket with holes of armstrong panel and plastic bracket. Align together
three boltholes on the plastic bracket and the boltholes on the metal bracket. Screw the brackets
to the device surface by using a screwdrive..
Install the device.
Connect cables to corresponding connector of the device. Description of the connectors is given
in section
Align the device and plastic bracket together, fix the position, turning clockwise.
4.3 Removing the device from the bracket
For removing the device from the bracket:
Pull the device up, Figure 7.
Remove the device.
