____________________________________________________________________________________
____________________________________________________________________________________
VoIP subscriber gateways
57
2.
Tone insertion to dialing
For long-distance access (for city access in case of office PBX), it is common to hear a PBX response,
that may be implemented by inserting comma in a sequence of digits.
Example: (8, 770)
–
when number 8770 is dialed the continuous tone will be played
after the digit '8'.
3.
Dialing restriction
When you specify an exclamation mark '!' at the end of the number template, dialing of numbers
corresponding to the template will be blocked.
Example: (8 10X xxxxxxx ! | 8 xxx xxxxxxx )
–
expression allows only long-distance
dialing and denies outgoing international calls.
4.
Replacement of dialing timer values
Timer values may be specified for the entire dialplan as well as for the specific template. 'S' character
deals with the
'Interdigit Short Timer'
, and 'L'— with the
'Interdigit Long Timer'
setting. Timer values
may be specified for all templates in the dialplan, when values are listed before the opening
parenthesis.
Example: S4 (8XXX.) or S4,L8 (XXX).
If these values are listed only in one sequence, they are effective only for this sequence. At that, you
are not required to delimit the key and timeout value by using colon, value may be specified anywhere
within the template.
Example: (S4 8XXX. | XXX) or ([1-5] XX S0)
–
record will trigger an instant call
transfer for dialing the 3-digit number beginning with 1, 2,
…
, 5.
5.
Direct address dialing (IP Dialing)
'@' placed after the number defines that the dialed call will be sent to the subsequent server address.
We recommend using 'IP Dialing', as well as call reception and transmission without registration
(«Call
Without
Reg»,
«Answer
Without
Reg»
). This may help when the server fails.
Also, IP Dialling address format may be used for numbers intended for the call forwarding.
Example 1: ( 8 xxx xxxxxxx )
–
11-digit number beginning with 8.
Example 2: ( 8 xxx xxxxxxx | <:8495> xxxxxxx )
–
11-digit number beginning with 8; if
7-digit number is dialed, add 8495 to number being sent.
Example 3: (0[123] | 8 [2-9]xx [2-9]xxxxxx)
–
dialing of emergency call numbers and
unusual sets of long-distance numbers.
Example 4: (S0 <:82125551234>)
–
quickly dial the specified number, similar to
'Hotline' mode on other gateways.
Example 5: (S5 <:1000> | xxxx)
–
this dialplan allows you to dial any number that
contains digits, and if there was no entry in 5 seconds dial number '1000' (for
example, it belongs to a secretary).
Example 6: (*5x*xxxx*x#|*2x*xxxxxxxxxxx#|#xx#|[2-7]xxxxx|8,
[2-9]xxxxxxxxx|8, 10x.|1xx<:@10.110.60.51:5060>).
Example 7: (1xx|0[1-9]|00[1-8]|*5x*xxxx*x#|*2x*xxxxxxxxxxx#|#xx#|[2-7]xxxxx|8,
[2-9]xxxxxxxxx|8, 10x.).