ELTEX TAU-8.IP Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 102

ELTEX TAU-8.IP Скачать руководство пользователя страница 50

____________________________________________________________________________________

____________________________________________________________________________________

50

VoIP subscriber gateways

Reserved SIP proxy

–

addition reserved SIP-proxy addresses:

–

Proxy address

–

network address of the reserved SIP-server;

–

Registration server

–

to specify registration server you should set flag before the field and

enter a registration server address of a reserved proxy;

To add reserved SIP server, click

‘

Add

’

button. To delete it, click

button opposite to server.

–

Home server check

–

check availability of the main SIP server in the Homing mode;

–

Check method

–

method selection to check availability of the main SIP server in the

‘Homing’ mode:

–

Invite

–

transmission of INVITE request to its address when performing an

outgoing call;

–

Register

–

periodic transmission of REGISTER messages to its address;

–

Options

–

periodic transmission of OPTIONS messages to its address;

–

Keepalive timeout (s)

–

periodic message transmission interval in seconds; used for

primary SIP server availability check;

–

SIP domain

–

domain where the device is located (fill in if required);

–

Use domain to register

–

use the domain during registration. In this case, domain will be

transmitted into Request URI of ‘REGISTER’ request;

–

Outbound proxy

–

‘Outbound’ mode:

–

Disable

– call will be routed according to the numbering schedule;

–

Outbound

– numbering schedule is required for outgoing communications, however, all

calls will be routed via SIP server; if there is no registration PBX response will be sent to
the subscriber in order to enable subscriber service management (VAS management);

–

Outbound with busy

– numbering schedule is required for outgoing communications;

however, all calls will be routed via SIP server; if there is no registration, VoIP will be
unavailable: error tone will be transmitted to the phone headset. ‘Outbound’ mode is
analogue to the device operation with dialing plan (x.);

–

Registration renewal time period (Expires)

–

time for subscriber port registration on SIP server. At

the average, port registration renewal will be performed after 2/3 of the specified period;

–

Registration Retry Interval

–

when the registration is unsuccessful, time period between SIP server

registration attempts;

–

User call (SIP):

180 Ringing

caller equipment will receive response 180; upon receiving this message,

caller equipment should send a local ringback tone into the line;

183 Progress (Early media)

–

caller equipment will receive response 183+SDP—used for

voice frequency path forwarding before the answer of the callee. In this case,

TAU-8.IP

will send a ringback tone remotely to the caller;

–

Use SIP Display info in Register

–

when checked, use username in 'SIP Display Info' field of the

'Register' message;

–

Ringback at 183 Progress

– when checked, 'ringback' tone will be sent upon receiving '183

Progress' message (w/o enclosed SDP);

–

Use Alert-Info header

–

process INVITE request 'Alert-Info' header to send a non-standard ringing

to the subscriber port. Cadence for a non-standard ringing may be configured in the section

3.1.4.9

;

–

Remove rejected media

– when option is enabled, passive media will be excepted from offer-SDP

against the RFC3264 advice. Enable the option for coordination with Iskratel equipment ;

«
...
48
49
50
51
52
...
»

Содержание TAU-8.IP







































































































Отзывы:

Нет отзывов