ELTEX TAU-8.IP Скачать руководство пользователя страница 23

Страница: 23 / 102

____________________________________________________________________________________

VoIP subscriber gateways

–

Autoupdate (Provisioning mode)

–

type selection of autoupdate:

–

Disabled

–

autoupdate is disabled;

–

Configuration & firmware

–

performed autoupdate of configuration and firmware;

–

Configuration only

–

provides only autoupdate of configuration;

–

Firmware only

–

provides only firmware autoupdate.

–

Priority from

–

priority selection of file determination for autoprovigioning:

–

DHCP options

–

when this priority is selected, URL of configuration file and firmware are

determined by using 43, 66 and 67 DHCP-options for that purpose one of the services should
have address getting configured via DHCP.1

If you could

n’

t eject autoupdate parameters the following URL parameters will be used

by default:
tftp://update.local/<MAC>.cfg

–

URL of the configuration file (where <MAC> is MAC-

address of the device, and symbol

‘.’

is byte-separator) tftp://update.local/tau8.fw is

URL of firmware file.

–

Configuration update interval, sec

–

determinates configuration update interval. 0 value

means that update will be applied only once when the device is launched;

–

Firmware update interval, sec

–

determinates firmware update interval. 0 value means

update will be applied only once when the device is launched.

–

Static settings

–

when this priority is selected, you should specify file location to update

configuration and firmware;

If the path to a file is absent, the following values will be used by default:
tftp://update.local/tau8.cfg

–

URL of configuration file;

tftp://update.local/tau8.fw- URL of firmware file.

–

Configuration file

–

full configuration pathname in the URL format (TFTP-, HTTP-, HTTPS-

and FTP-URLs are supported, for example, tftp://update-server.loc/tau8.conf);

–

Firmware update interval, sec

–

determines

configuration update interval. 0 value means

update will be applied only once during the device start;

–

Firmware file

–

pathname of firmware in the URL format (TFTP-, HTTP-, HTTPS- and FTP-

URLs are supported, for example, tftp://update-server.loc/tau8.conf);

–

Configuration update interval, sec

–

determines firmware update interval. 0 value means

update will be applied only once during the device start.

See a detailed description of DHCP-based autoprovisioning operation algorithm in the chapter

Autoprovisioning procedure operation algorithm via DHCP .

TR-069 Configuration:

–

Enable TR-069 client

–

when checked, integrated TR-069 protocol client will be enabled;

–

ACS URL

–

autoconfiguration server address. Enter address in the following format:

http://x.x.x.x:10301 (х.х.х.х – ACS server IP-address or domain name, 10301 – ACS server port by
default);

Содержание TAU-8.IP







































































































Результаты поиска

Содержание TAU-8.IP

Отзывы:

ELTEX TAU-8.IP, Руководство пользователя, Страница: 23 / 102

Результаты поиска

Содержание TAU-8.IP

Отзывы: