____________________________________________________________________________________
____________________________________________________________________________________
44
TAU-4M.IP Subscriber gateway
Enable D-DNS
– when selected, D-DNS service is enabled; the following settings will be available
for editing:
‑
D-DNS provider
– D-DNS provider address, select a provider from the list of available providers
or enter provider’s address manually;
‑
User name
– user name used to access D-DNS server account;
‑
Password
– password used to access D-DNS service account;
‑
Domain name
– registered domain name on D-DNS server. Device IP address information is
updated on the provider server periodically in 60 seconds.
To apply a new configuration and store settings into the non-volatile memory, click the
'Apply' button.
To
discard changes click the
'Cancel'
button.
2.6.2.12
‘SNMP’ submenu
TAU-4M.IP
software allows monitoring status of the device and configuring it via SNMP. In SNMP
submenu, you can configure settings of SNMP agent. Device supports SNMPv1, SNMPv2c protocol versions.
Enable SNMP
– when checked, SNMP will be enabled for utilization;
roCommunity
– password for parameter reading (common:
public
);
rwCommunity
– password for parameter writing (common:
private
);
TrapSink
– IP address or domain name of SNMPv1-trap message recipient in HOST [COMMUNITY
[PORT]] format;
Trap2Sink
– IP address or domain name of SNMPv2-trap message recipient in HOST [COMMUNITY
[PORT]] format;
InformSink
– IP address or domain name of Inform message recipient in HOST [COMMUNITY
[PORT]] format;
Sys name –
device name;
Sys contact
– device vendor contact information;
