____________________________________________________________________________________
____________________________________________________________________________________
TAU-4M.IP Subscriber gateway
27
Traffic hardware acceleration
– increase device bandwidth for PPP traffic (if
PPP
is
selected) or IPoE traffic (if
Ethernet
is selected) transmission depending on the selected
value.
–
PPTP
– operation mode when the Internet access is established via a tunnel, using PPTP.
When
PPTP
is selected, the following parameters will be available for editing:
PPTP Server
– PPTP server IP address;
User name
– user name for authorization on PPTP server;
Password
– password for authorization on PPTP server;
MTU
– maximum block size for data transmitted via the network (1462 is
recommended);
Connection Type
– depending on the value chosen, a PPTP session is always established
(AlwaysOn), initiated when traffic should be transmitted (OnDemand) or
established/terminated manually using the button “Connect tunnel”;
Idle
– the period of time after which a PPTP session is terminated;
LCP echo interval
– LCP request period;
LCP echo failure
– the number of missed LCP requests after which a PPTP session is
terminated;
Secondary access
— type of access to local network resources and PPTP server.
You may select 2 options:
DHCP
– dynamic access when IP address and all other required parameters are obtained via
DHCP;
Static
– in this case, you should specify PPTP server access settings manually:
IP address
– when the static access is used, PPTP server will be accessed from this address;
Netmask
– subnet mask for static access;
DNS server
– when the static access is used, local area network DNS;
Gateway
– when the static access is used, gateway for PPTP server access (if necessary).
Use secondary access for VoIP
– this option is available, if there are no dedicated interfaces for VoIP
service (
Use Internet settings
checkbox is selected). When the checkbox is not selected (default value),
VoIP service uses PPP interface for its operation; when selected, secondary access interface (IPoE) is
used;
Hardware traffic acceleration – works only for secondary access interface (IPoE).
–
L2TP
– operation mode when the Internet access is established via a tunnel, using L2TP.
When
L2TP
is selected, the following parameters will be available for editing:
L2TP Server
– L2TP server IP address;
User name
– user name for authorization on L2TP server;
Password
– password for authorization on L2TP server;
MTU
– maximum block size for data transmitted via the network (1462 is recommended
value);
Connection Type
– depending on the value chosen, a PPTP session is always established
(AlwaysOn), initiated when traffic should be transmitted (OnDemand) or
established/terminated manually using the button “Connect tunnel”;
Idle
– the period of time after which a L2TP session is terminated;
LCP echo interval
– LCP request period;
LCP echo failure
– the number of missed LCP requests after which a L2TP session is
terminated;
Secondary access
— type of access to local network resources and L2TP server.
You may select 2 options:
