____________________________________________________________________________________
____________________________________________________________________________________
TAU-4M.IP Subscriber gateway
25
–
100 Half
– 100Mbps data transfer rate with duplex mode is supported;
–
10 Half
– 10Mbps data transfer rate with half-duplex mode is supported;
–
10 Full
–
10Mbps data transfer rate with duplex mode is supported;
Connection settings
When you choose
Wired connection
method, the following connection settings will become available:
Work mode — the device operation mode:
–
Router
— router mode is established between LAN and WAN (LAN is isolated from WAN);
–
Bridge
— bridge mode is established between WAN and LAN interfaces: data is
transferred transparently from LAN to WAN and back—in fact, the device operates in the
switch mode.
When you choose
Router
operation mode, the following connection settings will become available:
Protocol
— select the protocol that will be used for device WAN interface connection to provider
network:
–
Static
– operation mode where IP address and all the necessary parameters for WAN
interface are assigned statically. When 'Static' type is selected, the following parameters
will be available for editing:
WAN IP address
– specify device WAN interface IP address in the provider network;
Netmask
— external subnet mask;
Default gateway
— address where the packet will be sent to, when route for it is not
found in the routing table;
1st DNS Server, 2nd DNS
Server — domain name server addresses (allows identifying the
IP address of the device by its domain name). You may leave these fields empty, if they
are not required.
–
DHCP
– operation mode where IP address, subnet mask, DNS address, default gateway
and other necessary settings for network operation are automatically obtained from
DHCP server.
Supported options:
1 – network mask;
3 – default network gateway address;
6 – DNS address;
12 – device network name;
15 – domain name:
26 – MTU size;
28 – network broadcast address;
33 – static routes;
42 – NTP server address;
43 – specific vendor information;
60 – alternative Vendor ID;
66 – TFTP server address;
67 – firmware file name (to download via TFTP from the server specified in Option 66);
82 – DHCP Relay agent information;
120 – SIP server outbound;
121 – classless static routes;