manualshive.com logo in svg

Elsys TraNET FE, Руководство пользователя

Поделиться
Скачать
Elsys TraNET FE Скачать руководство пользователя страница 6

Elsys AG

www.elsys-instruments.com

6

TraNET FE User Guide

2.2  Requirements of the Client Computer

For using the data acquisition software TranAX, the following minimal client computer config-
uration should be advised:

•  PC (Notebook, Desktop PC, IPC etc.)
•  Intel i5 or better (at least 2.0 GHz recommended)
•  Full HD Graphic display 1920x1080 pixels or higher
•  4 GB RAM minimum, recommended 8 GB
•  Hard disk with sufficient free space for programs and possible storage of measuring data (at 

least 100 GB recommended)

•  GBIT Ethernet port
•  Windows 10 Professional, 64 Bit

2.1.2  TraNET EPC

TraNET EPC: IPC based instrument. Individual configu-
rations up to 32 channels per device can be realized. 
The device works under Windows operating system. 
If only local operation is used, Ethernet link is not re-
quired (data acquisition operating software TranAX 
runs on the instrument itself). 

2.1.3  TraNET PPC

TraNET PPC: Portable PC with installed monitor and 
keyboard. Individual configurations up to 24 channels 
per device can be realized. The device works under 
Windows operating system. If only local operation is 
used, Ethernet link is not required (data acquisition 
operating software TranAX runs on the instrument it-
self).

For TraNET EPC and TraNET PPC consult the corresponding PC manuals and the manual of the 
TPCE modules.

Содержание TraNET FE

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды