Elsys AG
www.elsys-instruments.com
27
TraNET FE User Guide
© 2016 Elsys AG
Specifications subject to change without notice.
1 / 3
TPCE-LE Specification
Module Type
TPCE-LE-24014-4
TPCE-LE-12014-4
TPCE-LE-8014-4
TPCE-LE-4014-4
Number of Input Channels SE Module
4 single ended or 2 differential
software switchable
4 single ended or 2 differential
software switchable
Number of Input Channels DIF Module
4 single ended or
4 differential
software switchable
4 single ended or
4 differential
software switchable
Max. Sample Rate
(all channels are sampled simultaneously)
240 MHz
120 MHz
80 MHz
40 MHz
Amplitude Resolution
14 Bit up to 240 MHz
(16 Bit up to 60 MHz optional)
14 Bit up to 120 MHz
(16 Bit up to 60 MHz optional)
14 Bit up to 80 MHz
(16 Bit up to 20 MHz optional)
14 Bit up to 40 MHz
(16 Bit up to 10 MHz optional)
Memory (per Module)
Standard: 4 x 32 MWords (= 256 MByte)
Optional: 4 x 128 MWords (= 1 GByte)
Input Amplifier
Measurement Ranges
±100 mV – ±25 V rsp. 0.2 V – 50 V in 1, 2, 5 Steps
Offset
0 – 100 % in steps of 0.1% (Resolution 0.01 %)
Input Impedance
1 MΩ (± 0.2 %) or 50 Ω (± 0.5 %)
// 26 pF (± 5 %)
1 MΩ (± 0.2 %) // 35 pF (± 5 %)
Coupling
AC / DC software switchable (AC: -3 dB at < 5 Hz), Inputs invertible
Bandwidth at Range ≥ 1 V
120 MHz
60 MHz
30 MHz
18 MHz
Bandwidth at Range < 1 V
80 MHz
50 MHz
8 MHz
7 MHz
Slew Rate (10 – 90 %) @ Range ≥ 1 V
4 ns
6 ns
13 ns
25 ns
Slew Rate (10 – 90 %) @ Range < 1 V
6 ns
9 ns
50 ns
60 ns
Settling Time to 1%
< 200 ns
< 200 ns
< 200ns
< 200 ns
Low Pass Filter (RC-Filter)
2 Steps ( 1 MHz and 100 kHz) software switchable
Antialiasing-Filter (optional)
200 Hz – 5 MHz, min. 4. order Butterworth, software setable
Common Mode Range
Differential-Mode: ±8 V or +/-80 V at ranges. > 5 V
Common Mode Rejection
> 60 dB (DC – 1 kHz); > 54 dB ( – 100 kHz); > 40 dB ( – 20 MHz)
Range Error (±)
max. 0.1 % typ. 0.07 %
(after autocalibration)
max. 0.1 % typ. 0.03 %
(after autocalibration)
Offset Error (±)
max. 0.1 % typ. 0.07 %
(after autocalibration)
max. 0.1 % typ. 0.02 %
(after autocalibration)
Offset Drift (±)
max. (0.0100 % + 0.1 mV) per °C, typ. (0.0050 % + 0.03 mV) per °C
(will be compensated by autocalibration)
Input Noise:
@ max. Sample Rate
@ 5 MHz Sample Rate
@ 1 MHz Sample Rate
@ 100 kHz Sample Rate
@ 10 kHz Sample Rate
< 0.250 mVrms
< 0.120 mVrms
< 0.070 mVrms
< 0.040 mVrms
< 0.025 mVrms
< 0.200 mVrms
< 0.120 mVrms
< 0.070 mVrms
< 0.040 mVrms
< 0.025 mVrms
< 0.200 mVrms
< 0.120 mVrms
< 0.070 mVrms
< 0.040 mVrms
< 0.020 mVrms
< 0.180 mVrms
< 0.110 mVrms
< 0.060 mVrms
< 0.040 mVrms
< 0.015 mVrms
*2
Signal to Noise Ratio SNR:
@ max. Sample Rate
@ 10 MHz Sample Rate
@ 5 MHz Sample Rate
@ 1 MHz Sample Rate
@ 100 kHz Sample Rate
@ 10 kHz Sample Rate
59 dB
62 dB
66 dB
69 dB
79 dB
89 dB
62 dB
68 dB
70 dB
74 dB
82 dB
90 dB
67 dB
70 dB
72 dB
76 dB
84 dB
92 dB
70 dB
70 dB
72 dB
76 dB
84 dB
92 dB
*3
Channel Isolation (Crosstalk) @ 10 kHz
Ranges < 1V
> 80 dB
> 60 dB
Special : Autocalibration
Auto adjustment of gain and offset in all measurement ranges. (Initiated by software)
Trigger
Number of Trigger Channels
4 coupled to analog inputs, pos./neg.Edge, with or without hysteresis,
Window IN, Window OUT
Advanced Trigger (Option)
On all analog inputs: Slew Rate, Pulse Width, Pulse Pause or Period (too short or too long
= Missing Event), State (above / below), AND link, Product (trigger signal is calculated from
2 channels)
External Trigger input
1 per System (TTL), pos. or neg. Edge
Trigger Delay
-100 % (Pretrigger) to +200 % (Posttrigger) in 1 % steps
Miscellaneous
Digital Inputs (Marker)
8 (2 per analog channel) (TTL)
Optocoupler Connection Box (5 to 48 V) as additional option
Ext. Control Inputs (TTL))
Trigger, Arm/Disarm, Ext. Sampling (fmax = 10 MHz), external command to start recording
Status Outputs (TTL)
Trigger Output, Armed (=True during recording)
ICP® Sensor Supply (Option)
4mA Integrated Current Power for piezo sensors
40 - 240 MHz Data Acquisition Modules
6.2 TPCE-LE DAQ Card
