Design and Function
4
Page 32 of 97
Operating Instructions
enCore FC1
4.4 Interfaces (Rear Side of Device)
Fig. 4-3: Rear of device (example 1/3 overall width)
1
LAN interface (Ethernet network)
2
serial interfaces
3
24 V DC power supply
4
optional process boards
4.5 Available Process Boards
The configuration of the I/O board assignment is variable. In principle, any
I/O board can be inserted into any slot. If there are any kind of technical
limitations – depending on the board type, they are listed in the following
chapters (descriptions individual boards):
1
2
3
1