Assembly Instructions
5
Page 42 of 97
Operating Instructions
enCore FC1
ATTENTION!
Incorrect replacement parts and accessories are a safety
risk!
Incorrect or defective replacement parts and accessories
may detract from safety and lead to damage, malfunction, or
total device failure.
•
Use only original replacement parts and accessories from the
manufacturer.
If required, please contact our support staff directly.
5.3.1 Insert a Process Board in a Free Board Slot
The method used for changing or removing process boards is similar.
►
Ensure that all the required accessories are available:
•
process board(s)
•
suitable labelling plate(s)
•
jumper(s)
►
If necessary, install or update to the next enSuite on the work computer
(
refer to enSuite installation guide
►
Read out the FC1 device's parameterization with enSuite.
►
Disconnect the power supply.
►
Remove all the external cable connections from the device.
►
Remove the 4 mounting screws present on the rear of the device
(Positions A).
2
The installation guide is located on the enSuite installation CD. Alternatively, you can
download the PDF from the Elster website in the software downloads section: