THURSDAY, 27 FEBRUARY 2014
PAGE 5 OF 31
EMS75VR-ROYAL-VENDING-INSTALLATION AND USER GUIDE-ISS3
1.4
Tools required
The following tools are required (not supplied):
Drill driver
5/64” drill bit
1/2” deep well socket
1/4” nut setter
11/32” nut driver
No. 2 Phillips head bit
No. 2 Phillips head screwdriver
Cable ties.
Note:
Do not over tighten cable ties.
Note:
Cable ties must not be used to secure the sensor head. This will invalidate the warranty.
1.5
Before installation
The vending machine should be checked to ensure that it is in good working order before the ems75vr kit is
installed.
