THURSDAY, 27 FEBRUARY 2014
PAGE 13 OF 31
EMS75VR-ROYAL-VENDING-INSTALLATION AND USER GUIDE-ISS3
3.0
Mount the motion sensor
3.1
Motion sensor installation
The motion sensor is mounted in the hand chute facing forwards. The motion sensor must be fixed using the
two no. 4 self-tapping screws (supplied).
Caution: Using rivets invalidates the warranty.
3.2
How to mount the motion sensor
Install the motion sensor as follows:
12.
Route the motion sensor from the ems75vr through the vending machine door as shown below.
13.
Route the motion sensor over the top of the chute and then through the small hole on the top of the
chute as shown below.