Elspec G3500 BlackBox, Руководство пользователя и инструкция по установке

Страница: 312 / 358

312
Relay - Setup
The type of relay (electronic switch) used in the Portable BLACKBOX are C Form . The relay break
the connection with one throw before making contact with the other (break-before-make). Meaning
that the change-over or double-throw contacts control two circuits namely: one normally-open
contact & one normally-closed contact with a common terminal. There are 3 types of change over
relays:

The disable state is the default & disables the relay.

With the Manual state you can set the "Normally Open Output" as either open / close. This
state enables the relay of the device to act as a switch - for example switching a fan on/off
should the temperature rise above/below a pre-configured condition.

In the Automatic state, this will set the relay's output as a function of
Energy
/
Events
/
Alarms
.
SETTING UP THE RELAY:

Open
the Multi-IO Tab & select Relay Setup Tab:

Select the applicable Mode for each Relay:
Modes:

Disabled: Default state - disables this specific relay

Manual: Sets the static output for this relay either ‘0’ or ‘1’

Auto: To build a conditional output for the relay