Elspec G3500 BlackBox, Руководство пользователя и инструкция по установке

Страница: 230 / 358

230
Port Setup
Within the Port Setup section, you will be able to configure your Portable BLACKBOX for remote
access. In the Port Setup section you can configure the internet port numbers for standard
communication protocols (E-Mails, File Transfer & Web Browsing). The primary reasons for utilizing
this procedure is for networks where standard port numbers are forbidden or reserved by Firewalls;
or it may be used in instances where you would like to reserve the standard port number for a
legacy modem/router that does not support port forwarding. Most external modems/routers on the
market today do support port forwarding. Elspec recommends retaining the default port addresses
setup, in order to simplify & provide straightforward access for web browsers or FTP clients to your
G4500/G3500 unit via LAN/Internet.
CONFIGURING PORT NUMBERS FOR STANDARD COMMUNICATION PROTOCOLS

Access
the Network Window

In the Port Setup Section you have the following settings:

HTTP Port: Utilized for setting the Web Browser's Port Address

FTP Daemon: Utilized for setting the Port Address of File Transfer (Control Channel)

FTP Data: Used for setting the Port Address of File Transfer (Data Channel)

SMTP Port: Used for setting the Port Address of Mail Transfers. The SMTP server should
allow anonymous clients. The BLACKBOX doesn't support SMTP authentication.

To apply your changes select to review your changes
N
OTE
N
OTE
N
OTE
Changes to the FTP Ports also require changes to Elspec's PQSCADA's configuration. (In the F1
Help Wizard of the PQSCADA , follow the Components Nodes Configuration
Device procedure. The FTP Port is added in the PQSCADA as an addition with your
Portable BLACKBOX's Device IP in the IP Address field as: 100.100.100.100:20)