Elspec G3500 BlackBox, Руководство пользователя и инструкция по установке

Страница: 266 / 358

266
CONFIGURATIONS & DEFINITIONS:

Event Preset: Select User Defined (Preset 1 & 2 used in other applications)

Events List: See
Events List
for possible configurations

Description: Used to set a meaningful name for the event

Code: Event code # allocated automatically by the system from the available user events
codes & viewed in the
System Log

Condition: An event is based on one or more conditions. There are two types of conditions
Single & Multiple. No matter what type of condition is linked to the event, its dependency is
dictated by the condition ID string selected in the
Condition selection box

: Will open the
Edit Condition
window

Trigger: An event is basically a logic signal. Anytime a condition is not active, the event
remains in a "0" state. When a condition is met, the event becomes "1" state ( On Begin
Only ). The event remains on "1" state until the condition is de-activated ( At the End Only ).
The trigger configuration field defines what situations will generate an event record.
Notification is either on the beginning state, end state, or at both states (
On Both Begin &
End)

Notify by E-Mail: Will send
E-Mail Alerts
as soon as the event is triggered

Phase Index: This field should not be changed by user (reserved for future). In general this
field defines how phase indication will be recorded with the event.

Phase Combination: Event based on a condition of a 3 phase parameter can be further
configured with an additional logic operator in between phases to further mask/enable the
event generation. A 3 phase based condition (i.e. 3 phase voltage lines compared to nominal