Elspec G3500 BlackBox, Руководство пользователя и инструкция по установке

Страница: 270 / 358

270
Create Event Conditions
Codes 201 – 232 are used for configuring up to 31 different events that are fully customized events.
A custom event is typically built from one or more logical/mathematical conditions. When the
conditions are met, the event is triggered and the following information is generated and stored:

Time Stamp of beginning

Event Code number

Duration of event

Magnitude (A parameter value recorded during the event)

Magnitude deviation (from the normal/configured value/threshold)

Phases that were influenced

Severity of the Event ( value indicating how severe the event is)
Although the information implies a power related event, you are free to configure other type of
events that are not related to specific power network parameters, such as digital input-based events
or even temperature-based events and so on. (In such cases the Phases involved information should
be left blank/ignored.)
Events can also be based on multiple conditions. For example: an event will be triggered should
the voltage exceed threshold (x) and the outside (PT-100) temperature exceeds (x) limit.
This page contains buttons for applying changes/creating/deleting and performing various actions on
selected events.
CREATE EVENT CONDITIONS

Access
the Portable BLACKBOX log on as the Administrator under Configuration
Advanced
open the
Custom Events Tab

After selecting
Create New Events
naming the event in Description select
to open the Condition Window: