13
Setting of parameters (Software ETS)
General
Device name
[free entry]
The KNX PS640-IP can be assigned a name of your choice. The device name should be
descriptive (e. g. Line TF). It is used to search for and recognize a device.
Monitoring bus voltage failure
disable • enable
If a KNX failure is detected, it is reported on the IP. Return of the bus voltage is also
reported.
IP address assignment
automatic (DHCP) • manual
Automatic (DHCP):
The IP address is automatically assigned on the DHCP, i.e.
additional settings are not required. To be able to use this function, there must be a
DHCP server in the LAN (many DSL routers have an integrated DHCP server).
Manual:
In this case, the IP address, the subnet and the gateway IP address must be
entered manually.
