![background image](http://html.mh-extra.com/html/elsner-elektronik/arexa/arexa_manual_2396690011.webp)
10
You may leave the automatic settings at any time by pressing the key . The
accomplished changes of the values are not saved in this case.
If you do not press any key in the automatic settings for 5 minutes, the display
automatically changes to temperature display. Accomplished settings are not
saved either.
A. Indoor temperature for opening
In the automatic settings, you must indicate at first the lightness from which
shading shall start.
As soon as the value indicated here is exceeded, the automatic opens the
window (unless the blocking value for the outdoor temperature has fallen below,
see next parameter)
The presetting is 25°C.
Adjust the value with
(higher) and (lower) or select
(off) in order to
switch off the function. You reach the setting
by pressing once more
when the display shows “5°C”. If you select
, there is no control in terms of
temperature. Therefore, the following automatic parameter (chapter B) is
skipped. The window may be operated manually and the protection against wind
and rain is active (if set accordingly, see chapter "C. Wind alarm” and “D. Rain
alarm”).
Press
in order to get to the setting of the next parameter.