![background image](http://html.mh-extra.com/html/elsner-elektronik/arexa/arexa_manual_2396690020.webp)
19
4. Operating command in case of wind or rain alarm
After the setting of the operating direction, you may now select whether the
operating command in case of wind or rain alarm is temporary or permanent.
After the wind or rain alarm has been activated, the window is closed. The
operating command for the connected drive mechanism either ends after 4
minutes or is permanently maintained as long as the alarm message exists. The
permanent operating command is necessary if Arexa is used as control centre
for wired motor drive units (e. g. IMSG 230) which control several drive
mechanisms.
Press the key
in order to switch between the displays Off and On.
Select
if in case of alarm, the operating command shall stop after 4
minutes (setting for conventional window control systems) or
if in case of alarm, the operating command shall be permanently
activated (operating command ends as soon there is no alarm
message anymore).
Press the
key in order to access the next setting step.