4
Installation and start-up
Actuator KNX R1-B4 compact 16 A
• Version: 28.05.2020 • Technical changes and errors excepted.
The product is compliant with the provisions of EU guidelines.
2.
Installation and start-up
2.1. Installation notes
Installation, testing, operational start-up and troubleshooting should
only be performed by an electrician.
DANGER!
Risk to life from live voltage (mains voltage)!
There are unprotected live components within the device.
•
VDE regulations and national regulations are to be followed.
•
Ensure that all lines to be assembled are free of voltage and take
precautions against accidental switching on.
•
Do not use the device if it is damaged.
•
Take the device or system out of service and secure it against
unintentional use, if it can be assumed, that risk-free operation is no
longer guaranteed.
The device is only to be used for the intended purpose described in this manual. Any
improper modification or failure to follow the operating instructions voids any and all
warranty and guarantee claims.
After unpacking the device, check it immediately for possible mechanical damage. If it
has been damaged in transport, inform the supplier immediately.
The device may only be used as a fixed-site installation; that means only when assem-
bled and after conclusion of all installation and operational start-up tasks and only in
the surroundings designated for it.
Output
1 × output, free of potential
power supply U | 2× OUT A1
Output load capacity:
• 16 A with alternating voltage 250 V AC
• 5 A with direct current 30 V DC
Cable cross section: 0.5 to 1.5 mm²
Inputs
4× digital, potential-free, maximum cable length 10 m
Data output
KNX +/- bus connector terminal
BCU type
Integrated microcontroller
PEI type
0
Group addresses
max. 254
Assignments
max. 254
Communication objects
45
Содержание 70574
Страница 1: ...EN Installation and Adjustment KNX R1 B4 compact 16 A Switching Actuator Item number 70574 ...
Страница 2: ......
Страница 25: ......