8
Addressing of the device at the bus
Actuator KNX R1-B4 compact 16 A
• Version: 28.05.2020 • Technical changes and errors excepted.
2.4. Instructions for assembly and operational
start-up.
Never expose actuators to water (e.g. rain) or dust. This can damage the electronics.
You must not exceed a relative air humidity of 80%. Avoid condensation.
After the auxiliary voltage has been applied, the device will enter an initialisation phase
lasting a few seconds. During this phase no information can be received or sent via the
bus.
3.
Addressing of the device at the bus
The device is supplied with the bus address 15.15.255. You can program another ad-
dress into the ETS by overwriting the 15.15.255 address or by teaching via the pro-
gramming button.
4.
Disposal
After use, the device must be disposed of or recycled in accordance with the legal reg-
ulations. Do not dispose of it with the household waste!
KNX R1-B4
compact 16A
Nr. 70574
PRG
U
A1
OUT A1
LED
PE N L
PE N L
L
N
PE
Mains
(230 V AC)
Two consumer loads as a group:
Both loads are switched at the same time.
Each terminal contact may be loaded with a maximum
of 16 A.
Содержание 70574
Страница 1: ...EN Installation and Adjustment KNX R1 B4 compact 16 A Switching Actuator Item number 70574 ...
Страница 2: ......
Страница 25: ......