18
Setting parameters
Actuator KNX R1-B4 compact 16 A
• Version: 28.05.2020 • Technical changes and errors excepted.
The input can be disabled with a blocking object. For active blocking there is
no bus
communication
.
Input as dimmer
If the input should be used as a dimmer, select the bus function "Dimmer" and define
the button function, time interval (switching/dimming) and if required, the repeat inter-
val for extended pressing of the button.
The input can be disabled with a blocking object. For active blocking there is \
no bus
communication
.
Input as 8 bit encoder:
If the input is to be used as an 8-bit encoder, select the bus function "8-bit encoder" and
define which value is to be transmitted.
The input can be disabled with a blocking object. For active blocking there is
no bus
communication
.
Input as temperature encoder:
If the input is to be used as a temperature encoder, select the bus function "Tempera-
ture encoder" and define which value is to be transmitted between -30°C and +80°C.
By sending a temperature value, for example, the set point of the temperature control
can be changed.
Use blocking object
No • Yes
Function
Dimmer
Command (button function)
Brighter • darker • Brighter/darker
Time between switching and dimming
(in 0.1 s)
1...50; 5
Repetition of the dimming command
No • Yes
Repetition of the dimming command
on long button press
(if dimmer command is repeated)
every 0.1 s... • every 2 s; every 1 s
Dimming by
(if dimmer command is repeated)
1.50% • 3% • 6% • 12,50% • 25% • 50%
Use blocking object
No • Yes
Function
8 bit encoder
Value
0...255
Use blocking object
No • Yes
Function
Temperature encoder
Temperature in 0.1?
-300...800; 200
Содержание 70574
Страница 1: ...EN Installation and Adjustment KNX R1 B4 compact 16 A Switching Actuator Item number 70574 ...
Страница 2: ......
Страница 25: ......