![background image](http://html1.mh-extra.com/html/elsner-elektronik/70516/70516_installation-and-adjustment_2396645008.webp)
6
Installation and commissioning
Actuator KNX S1R-BA4-UP 24 V
• Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
•
Ensure that the return path/access to the building is not blocked
if spending time outside the building (danger of being locked out).
•
Correctly decommission the system for maintenance and
cleaning work.
If there is a power outage, the system does not work. Therefore, shadings should be
moved to a save position if there are anticipated weather conditions, for example, if
this has not already been done by the automatic function (product protection).
If the power supply is removed, the connected drive switches off. When the power is
restored, the consumer remains switched off until a new movement command is re-
ceived by the actuator.
2.3. Installation
Fig. 1: Bus side
1
Connector analogue/digital inputs
2
Label field
3
KNX plug te/-
4
Programming LED and programming
button (countersunk)
1
2
3
4
Analogue/digital inputs connector assignment:
1: GND | 2: IN1 | 3: GND | 4: IN2 | 5: GND | 6: IN3 | 7: GND | 8: IN4
All GND connectors are internally bridged.