![background image](http://html1.mh-extra.com/html/elsner-elektronik/70516/70516_installation-and-adjustment_2396645011.webp)
9
Addressing of the device at the bus
Actuator KNX S1R-BA4-UP 24 V
• Version: 27.05.2020 • from software version 4.00, ETS programme version 4.0 •
Technical changes and errors excepted.
2.5. Instructions for assembly and initial start-up
Never expose the actuator to water (e.g. rain) or dust. This can damage the electronics.
You must not exceed a relative air humidity of 80%. Avoid condensation.
After the auxiliary voltage has been applied, the device will enter an initialisation phase
lasting a few seconds. During this phase no information can be received or sent via the
bus.
For KNX devices with safety functions (e.g. wind or rain blocks), it is important to set
up periodical monitoring of the safety objects. The ideal ratio is 1:3 (example: if the
weather station sends a value every 5 minutes, the actuator must be configured for a
monitoring period of 15 minutes).
3.
Addressing of the device at the bus
The device is supplied with the bus address 15.15.255. You can program another ad-
dress into the ETS by overwriting the 15.15.255 address or by teaching via the pro-
gramming button.
4.
Disposal
After use, the device must be disposed of or recycled in accordance with the legal reg-
ulations. Do not dispose of it with the household waste!