![background image](http://html1.mh-extra.com/html/elsner-elektronik/70516/70516_installation-and-adjustment_2396645031.webp)
29
Parameter setting
Actuator KNX S1R-BA4-UP 24 V
• Version: 27.05.2020 • Technical changes and errors excepted.
Block – rain blocking
The menu item only appears if a rain blocking was configured for "control". The input
object "rain blocking" is linked with the output object of a rain sensor.
If blocking is active
• no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)
Waiting period in secure position in min
after blocking
1...255; 5
Behaviour after waiting period
For manual operation before and after
blocking
• no action
• move into last position
For automatic operation after blocking
follow automatic
Send current blocking status
no • yes
Designation
[rain blocking]
Enter a designation here!
If blocking object has value =1
• no action
• stop
• move into position
• up-command • down-command
(shutter/blind)
• retract-command • extend-command
(awning)
• close-command • open-command
(window)
Position in % (only if by using a block, a
specific position is achieved)
0...100
Slat position in % (only if by using a block,
a specific shutter position is achieved)
0...100
Waiting period in secure position in min
after blocking
1...255; 5
Behaviour after waiting period
For manual operation before and after
blocking
• no action
• move into last position
For automatic operation after blocking
follow automatic